QUANTEL   REPEATERS

Home - Office Low Power Small Repeaters
Note: You may need carrier or Government approval for the installation of a repeater. Please check before purchasing.


Click for enlargement
click for enlargement
RP12 Indoor Repeater

Available in GSM and CDMA. Ideal for household use.

Includes:
  • 1 x 15 metre cable
  • 1 x 10 metre cable
  • 1 x Yagi antenna
  • 1 x dome antenna
Products are not approved for use in NZ

The repeater will serve several cellphones on the same frequency. One dome will cover about 100 SQ mtrs therefore should you require reception in more than one room you will need a separate dome antenna for each room plus extra cable and splitters.

Please enquire if you have special needs.

Installation can by done by yourself or you can use an electrician.

“I found a strong spot on the roof for the antenna and installed the rest in the ceiling space for a trial with great success. WOW what a difference.”   Fraser


RP12   SPECIFICATIONS
Electrical Specifications
Model
 GSM
 CDMA
Frequency Range (Mhz)
 824 ~ 960
 1710 ~ 1990
Gain (dBi)
 10
Half Power Beamwidth
 H-Plane 62°
 H-Plane 46°
E-Plane 55°
 E-Plane 42°
Front to Back Ratio (dB)
 10
VSWR
 10
Impedance (Ω)
 50
Power Handling (W)
 50
Connector Type
 N-Female
Mechanical Specifications
Height (mm)
 640
 430
Weight (kg)
 0.75
 0.54
Rated Wind Velocity (m/s)
 60
 60
Mounting Hardware (mm)
 ø40-ø70
 ø30-ø60

NZD $1,560.20 (not for sale in NZ)  



click for enlargement
RIF800

Repeater for CDMA800 / 3G850 Systems.

A wireless solution to amplify a mobile phone signal and repeat the signal within motels, constructions sites and large homes.
  • Multiple Indoor Antennas. For larger coverage areas or multiple floors within a building, several indoor antennas can be connected to the RIF to enable a greater indoor coverage area.
  • Easy to install. Installation of the RIF can be done by the end user. An outdoor antenna is mounted on the roof and then the cable is run down inside the building to the repeater box. An indoor antenna is then connected to the repeater box inside the building.
  • Serves 10+ cellphones.

RIF800   SPECIFICATIONS
Band
 CDMA800 / 3G850
Frequency Range (Mhz)
  
Uplink
 824-849
Downlink
 869-894
Output Power
 +19dBm 2dB/1Tone
Input Power
 -51dBm ~-21dBm
Gain
 
Uplink
 70 2dB
Downlink
 70 2dB
Flatness
 4dB (p-p)
VSWR
 1.7 (max)
Delay
 Under 5ms
ALC @ (-51dBm ~-21dBm)
 19dBm 2dB/1Tone
IMD (@2Tone, 16dBm)
 -45dBc Over
Impedance
 50ohm
Power Supply
 DC 9V/3.5A
RF Connector Type
 SMA Female
ALC
 ON
Level Meter
 ON
Internal Repeat System
 IF
Weight
 1.9kg
Dimension (D x W x H)
 227 x 158 x 33.5 mm

NZD $1,950 (not for sale in NZ)  



click for enlargement
RIF900

Repeater for GSM900 Systems.

A wireless solution to amplify a mobile phone signal and repeat the signal within a motels, constructions sites and large homes.
  • Multiple Indoor Antennas. For larger coverage areas or multiple floors within a building, several indoor antennas can be connected to the RIF to enable a greater indoor coverage area.
  • Easy to install. Installation of the RIF can be done by the end user. An outdoor antenna is mounted on the roof and then the cable is run down inside the building to the repeater box. An indoor antenna is then connected to the repeater box inside the building.
  • Serves 10+ cellphones.

RIF900   SPECIFICATIONS
Band
 GSM900
Frequency Range (Mhz)
  
Uplink
 890-915 MHz
Downlink
 935-960 MHz
Output Power
 +19dBm 2dB/1Tone
Input Power
 -51dBm ~-21dBm
Gain
 
Uplink
 70 2dB
Downlink
 70 2dB
Flatness
 4dB (p-p)
VSWR
 1.7 (max)
Delay
 Under 5ms
ALC @ (-51dBm ~-21dBm)
 19dBm 2dB/1Tone
IMD (@2Tone, 16dBm)
 -45dBc Over
Impedance
 50ohm
Power Supply
 DC 9V/3.5A
RF Connector Type
 SMA Female
ALC
 ON
Level Meter
 ON
Internal Repeat System
 IF
Weight
 1.9kg
Dimension (D x W x H)
 227 x 158 x 33.5 mm

NZD $1,950 (not for sale in NZ)  



click for enlargement
RIF2100

Repeater for 3G2100 Systems.

A wireless solution to amplify a mobile phone signal and repeat the signal within motels, constructions sites and large homes.
  • Multiple Indoor Antennas. For larger coverage areas or multiple floors within a building, several indoor antennas can be connected to the RIF to enable a greater indoor coverage area.
  • Easy to install. Installation of the RIF can be done by the end user. An outdoor antenna is mounted on the roof and then the cable is run down inside the building to the repeater box. An indoor antenna is then connected to the repeater box inside the building.
  • Serves 10+ cellphones.

RIF2100   SPECIFICATIONS
Band
 3G2100
Frequency Range (Mhz)
  
Uplink
 2110-2170
Downlink
 1920-1980
Output Power
 +16dBm 2dB/1Tone
Input Power
 -54dBm ~-24dBm
Gain
 
Uplink
 70 2dB
Downlink
 70 2dB
Flatness
 4dB (p-p)
VSWR
 1.7 (max)
Delay
 Under 5ms
ALC @ (-51dBm ~-21dBm)
 +16dBm 2dB/1Tone
IMD (@2Tone, 16dBm)
 -45dBc Over
Impedance
 50ohm
Power Supply
 DC 9V/3.5A
RF Connector Type
 SMA Female
ALC
 ON
Level Meter
 ON
Internal Repeat System
 IF
Weight
 1.9kg
Dimension (D x W x H)
 227 x 158 x 33.5 mm

NZD $1,950 (not for sale in NZ)  


Legal   Warranty   Site Map
©2004 - All Rights Reserved. Quantel 2011 Limited. Website by pixel magic